Router TP-Link Archer C1200, WLAN AP, Router, 4x GbE, 1x WAN 1GbE, 1x USB, crna

WAN connectors: 1x 10/100/1000BaseT (RJ45) LAN connectors: 4x 10/100/1000BaseT (RJ45) Management, monitoring and configuration: WEB management, Remote Management, Access Schedule, Rule Management Supported routing protocols: Static Routing, Dynamic Routing Supported protocols and standards: WPS - Wi-Fi Protected Setup, WMM - Wi-Fi Multimedia, Bandwidth control, PPPoE - Point-to-Point Protocol over Ethernet, L2TP - Layer 2 Tunneling Protocol, DHCP Client - Dynamic Host Configuration Protocol Client, DHCP Server - Dynamic Host Configuration Protocol Server, Virtual Server, Port triggering, UPnP - Universal plug-and-play, DMZ - Demilitarized Zone, DynDNS - Dynamic Domain Name System, Parental control, SPI Firewall, MAC filtering, IP and MAC binding, IPv4 - Internet Protocol version 4, IPv6 - Internet Protocol version 6, Samba, FTP - File Transfer Protocol Supported VPN protocols: L2TP pass-trough, L2TP pass-trough, IPSec pass-trough, OpenVPN server, PPTP Protection before Denial of Service (DoS) attacks: Yes Additional functions: Media server, Print server, Repeater mode WLAN support: Yes Supported networks - WirelessLAN: IEEE 802.11ac - Wireless Lan, IEEE 802.11n - Wireless LAN 300Mbps, 5Ghz, IEEE 802.11a - Wireless LAN 54Mbps, 5GHz, IEEE 802.11n - Wireless LAN 150Mbps, 2.4GHz , IEEE 802.11g - Wireless LAN 54Mbps, 2.4GHz, IEEE 802.11b - Wireless LAN 11Mbps, 2.4GHz Encryption: WEP - Wired Equivalent Privacy, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access II External antenna connector: No Standard accessory: Installation manual, Ethernet cable, Power adapter Additional information: 3 external antennas, Guest Network: 2.4GHz x 1, network 5GHz x 1 Height: 32.5mm Width: 243mm Depth: 16.6mm Datasheet: Specification [LINK]